01 / Profile processing
SteeAl Tech / Industrial technology From design to production
For demanding products. For well-considered processes.Engineering.
Engineering.
In motion.
Explore technologies↓
From production / MECAL + Pressta-Eisele
CNC profile machining.
Industrial cutting. Solvent recovery.
02 / Related steps
Automation.
03 / Fluid regeneration
Process technology.
01 / Explore technologiesEach process has
Each process has
its technology.
Three specializations. Choose the manufacturer
and explore the technologies for your production.
MECAL / CNC machining and cutting
Precision in every detail.
CNC machining, cutting and profile automation. From a single operation to a connected production process.
Full MECAL rangeSelect area
From process to machine
CNC machining centresMilling · drilling · multiple sides of the profileDouble-head sawsLength · left and right angleSingle-head sawsMaterial preparation · workshop cuttingAutomatic linesLoading → machining → cuttingSpecial-purpose machiningFaces · cut-outs · openings · reinforcementsPVC welding and cleaningFrom prepared profiles to frameWorkshop equipmentMeasuring · transport · assembly
Formeco / DQ 250 WxC
Liquid. Into a new cycle.
Solvent regeneration and process fluid treatment. The selection starts with the fluid composition and the desired result.
Full Formeco rangeSelect area
From process to machine
Solvent recoveryContaminated solvent → distillate + residueHP vacuum evaporatorsProcess water → water distillate + concentrateConcentratorsWater removal · residue thickeningOther energy sources and MVRHot water · steam · recompressionFractionation and special processesComponent separation · oil regeneration
Pressta-Eisele / PROFILMA 620
Cut. Joint. Precise result.
Dedicated technology for sawing, cut-outs, punching and joining profiles. Tooling and machine matched to your task.
Full Pressta-Eisele rangeSelect area
From process to machine
Corner crimpingAluminium profiles → frame jointProfile punchingRepeated openings with dedicated toolProfile notchingPreparation of joints of structural profilesWorkshop cuttingBench and semi-automatic sawsProduction sawing and cutting linesPROFILMA · KS · SW · dedicated cellsProfile feeding, measuring and chip extractionAdditional equipment for a tidy process
02 / Technology in operationQuality.
Quality.
Close up.
Explore the points where
design turns into result.
MECAL MC 302 GEOS MDT
MECAL MC 302 GEOS MDTExplore the range ↗
MECAL MC 304 Ariel-5
MECAL MC 304 Ariel-5Explore the range ↗
Pressta-Eisele PROFILMA 620
Pressta-Eisele PROFILMA 620Explore the range ↗
Control starts at clamping.
Watch the clamping movements and the machining unit. For selection, we match the profile geometry, tool access and clamping method.
The tool in the right place.
The rotation and travel of the machining head open access to different sides of the profile. The video shows the MC 304 Ariel-5 machining center.
Every operation is part of the whole.
Feed, sawing and removal are linked in sequence. See the flow of profiles and cut pieces on the PROFILMA 620 line.
03 / Machines in operationMotion reveals
Motion reveals
more than words.
Real footage of machines and processes.
Select the production view.
MECAL MC 316 Swing
Feed, processing and cutting of profiles.
Formeco DQ 250 WxC
Industrial solvent regeneration.
Pressta-Eisele PROFILMA 620
Example of a connected sawing line.
YouTube is connected only after your permission for the selected clip.
NEWS
Next step in the technology.
FROM THE WORLD OF TECHNOLOGYMECAL at VETECO 2026: five-axis processing and profile cutting
MECAL will present machines for cutting and processing profiles from 10 to 13 November 2026 at the VETECO fair at IFEMA Madrid. The announced machines include the TDC 622 Edgemaster twin-head saw and the MC 304 Ariel 5 MTS five-axis machining centre. According to the manufacturer, Edgemaster, with five controlled axes, enables compound angle cuts on large profiles. The Ariel 5 MTS combines full-bar machining, cutting and separation of finished parts in a single setup. MECAL will also showcase the meSoft2.0 software and integration with CAD/CAM systems and production management.
FROM THE WORLD OF TECHNOLOGYPressta-Eisele Profilma HS: simultaneous cutting of three bars in practice
On 22 September 2026, Pressta-Eisele publicly unveiled the Profilma HS high-speed saw for cutting solid material for the first time at partner RI.F.SAW in Rezzato, Italy. During the demonstration, the machine simultaneously cut three round bars with a diameter of 30 mm. For the presented configuration, the manufacturer states 0.5 seconds per finished part. The saw is intended for cutting aluminum, copper and brass. Pressta-Eisele highlights electrical busbars as well as components for connectors and contacts among the application areas.
FROM THE WORLD OF TECHNOLOGY
Pressta-Eisele at ALUMINIUM 2026: live sawing and automation
From 6 to 8 October 2026, Pressta-Eisele will demonstrate its own technologies at ALUMINIUM in Düsseldorf. Planned demonstrations include the Profilma HS saw, the Profilma 460 for thin-walled battery housing profiles, and the Profilma 502 ST-V, which combines sawing and punching. The modular FlexCell cell will showcase friction drilling, thread forming and sensor-based inspection. The presentations will take place in Hall 5, at stand 5A30.
Your product.
Starting point for everything.
First we understand what you want to make or improve. Then we define the technology and scope of implementation together.
From request to configuration
Schematic view of cooperation · 3 steps
We understand the task.
Drawing, material, operations and production scope. For liquids, composition, quantity and desired result.
We connect technology.
We align the work area, tool, clamping and material flow into a sensible configuration.
We define the configuration.
Together we review the technical requirements, additional equipment and scope of supply and support.