Industrial regeneration · DQ 250 WxC
The video shows the stated model, product family or application. Equipment and the operating cycle for your configuration are confirmed separately.
Design concept
Solvent distiller with usable charge of 250 litres from the Industrial series. The internal scraper moves the contents and helps concentrate the residue. Multi-stage control enables process adjustment and integration of automatic filling or emptying.
Technical data Machine in operation Ask about this model ↗Solvent recovery
How to understand the process.
01 / 04
From contaminated solvent to distillate
In distillation, the solvent is evaporated, the vapour is cooled in the condenser, and the less volatile residue remains in the kettle. The displayed fill indicates the quantity per batch; it is not the same as hourly or daily output.
The animation explains the application principle. It is not a simulation of the motion or equipment of model DQ 250.
What defines this version ↓Key features of DQ 250
- Usable filling: 250 l
- Industrial series: sequential batches or continuous feed depending on configuration.
- Indirect heating via a jacket with thermal oil.
- We select the condenser cooling and discharge method according to the design.
- Vacuum equipment is an option for suitable solvents with a higher boiling point.
- The selection is based on the liquid composition, safety data sheet and residue verification.
How to compare the version
When selecting a static or dynamic version, we check the behaviour of the residue, foaming, boiling point and required purity. Vacuum, cooling and automatic filling are determined according to the liquid and the configuration. The basis is the composition and the safety data sheet.
Usable filling250 l
DesignWith scraper
SeriesIndustrial
Processing modeSequential batches or continuous filling, depending on the configuration
Selected data from the technical table. Multiple values mean different configurations; details are listed below.
Version details
Technical data.
| Data | Version |
|---|---|
| Usable filling | 250 l |
| Series | Industrial |
| Design | With scraper |
| Processing mode | Sequential batches or continuous filling, depending on the configuration |
The values apply to the specified model or family. More values in a row mean different versions or equipment. Standard and optional equipment as well as final dimensions are confirmed for the quotation configuration.
Technical source for this model external link
The manufacturer's original documentation opens in a new tab.
Formeco / DQ 250 external page ↗From production
See it in operation.
YouTube is connected only after your permission for each playback.
Technology in cross-section
From mixture to regenerated solvent.
Explore the sequence of motions and flows. Select a phase or move the timeline slider.
01 / 04
Charge
The contaminated solvent is filled into the vessel. The composition of the mixture and the properties of the residue determine the suitable design and processing conditions.
Evaporation
The heating jacket transfers heat to the mixture. The solvent evaporates into vapour, while less volatile components remain in the vessel.
Condensation
The solvent vapour enters the cooled condenser through a separate line. The condensed solvent drains into the distillate collector.
Residue
After the cycle ends and the material has cooled sufficiently, remove the residue. Emptying depends on the version: bag, tilt or discharge.
Explanation of the principle with partial sections. The geometry, equipment and speed shown are not a technical simulation of a specific model. The design is verified against the drawing and manufacturer data.
From request to equipment
Let's talk about the DQ 250 model.
Together we will check the suitability and prepare the configuration for your work.