NC-controlled saw for cut-outs and spatial corner joints. Motorised adjustment of height, depth and angles enables repeated complex profile cut-outs.
Technical data Ask about this model ↗Profile notching
How to understand the process.
- 01Profile and joint angle
- 02Cutout production
- 03Prepared joint
Two planes define the profile cutout
For cuts for façade and structural joints, we combine vertical and horizontal cutting. Height, depth and angles together determine the geometry of the profile joint.
The animation explains the principle of the application area. It is not a simulation of motion or of the equipment of model PRISMA 650.
What defines this version ↓Key features of PRISMA 650
- NC adjustment of four axes for the height, depth and orientation of the cut-out.
- Separate motors drive the horizontal and vertical saw blades.
- Infinitely variable hydropneumatic feed; pneumatic clamping in vertical and horizontal direction.
- For straight and angle cuts; feasibility of compound angles is checked from the drawing.
How to compare the version
Manual and motorised adjustment mainly affect setup and repeatability of geometry. Before selection, we check the joint drawing, profile orientation and access for both saw blades.
Selected data from the technical table. Multiple values mean different configurations; details are listed below.
Version details
Technical data.
| Data | Version |
|---|---|
| Motorised axes | 4: cutout height and depth and angle settings |
| Profile height | Up to 280 mm |
| Profile width | Up to 320 mm at 90° |
| Cutout depth | Horizontal up to 210 mm / vertical up to 262 mm |
| Cutout width | Up to 280 mm |
| Saw blade diameters | 550 mm horizontal / 650 mm vertical |
| Motor power | 2 × 3,0 kW |
| Working height | 1100 mm |
| Mass | Approx. 1500 kg |
The values apply to the specified model or family. More values in a row mean different versions or equipment. Standard and optional equipment as well as final dimensions are confirmed for the quotation configuration.
Technical source for this model external link
The manufacturer's original documentation opens in a new tab.
Pressta-Eisele / PRISMA 650 external page ↗From request to equipment
Let's talk about the PRISMA 650 model.
Together we will check the suitability and prepare the configuration for your work.