Preparation
The profile is supported and positioned at the required length. The illustration shows a square cut with one cutting head.
Design concept
Industrial saw for 90° square cuts. The hydraulic-pneumatic blade feed from below is intended for repetitive cutting of aluminium and plastic profiles.
Technical data Ask about this model ↗Workshop cutting
How to understand the process.
01 / 04
Preparation of the profile for the next operation
In workshop cutting, we combine the cutting area, feed method and length setting. Material support and access for clamping are important for individual parts and when changing batches.
The animation explains the application principle. It is not a simulation of the motion or equipment of model GS 550 Fix.
What defines this version ↓Key features of GS 550 Fix
- Configuration for square cuts at a fixed angle of 90°.
- For repeated cutting of aluminium and plastic profiles without changing the angle.
- Blade diameter: 550 mm
- Motor power: 7,5 kW (S6)
- Workshop cutting; supplementary selection according to the existing equipment.
How to compare the version
A fixed 90° saw and a mitre saw serve different tasks. We compare the cutting capacity at the actual angle and select the required equipment together with the length stop and extraction system.
Blade diameter550 mm
Cutting angle90°
Motor power7.5 kW (S6)
Selected data from the technical table. Multiple values mean different configurations; details are listed below.
Version details
Technical data.
| Data | Version |
|---|---|
| Blade diameter | 550 mm |
| Motor power | 7.5 kW (S6) |
| Cutting angle | 90° |
The values apply to the specified model or family. More values in a row mean different versions or equipment. Standard and optional equipment as well as final dimensions are confirmed for the quotation configuration.
Technical source for this model external link
The manufacturer's original documentation opens in a new tab.
Pressta-Eisele / GS 550 Fix external page ↗Close-up view
Technology in detail.
Technology in cross-section
Controlled passage through the profile.
Explore the sequence of motions and flows. Select a phase or move the timeline slider.
01 / 04
Clamping
The clamps hold the workpiece against the cutting plane. The setup is adjusted to the cross-section and orientation of the profile.
Cut
The rotating blade emerges through the table slot and cuts the clamped profile from below. This illustrates the principle of an upward cut; the feed mechanism depends on the model.
Retract
The tool retracts from the material. The clamps release after the tool has withdrawn, allowing the cut piece to be removed.
Explanation of the principle with partial sections. The geometry, equipment and speed shown are not a technical simulation of a specific model. The design is verified against the drawing and manufacturer data.
From request to equipment
Let's talk about the GS 550 Fix model.
Together we will check the suitability and prepare the configuration for your work.