Two-axis CNC machine for cleaning the corners of welded PVC frames and sashes. Intended for repeatable removal of weld beads and final surface finishing after welding.
Technical data Ask about this model ↗PVC welding and cleaning
How to understand the process.
- 01Prepared profiles
- 02Joint welding
- 03Weld cleaning
From profile preparation to final joint
Welding and weld cleaning are two different operations. We select the machine for the specific phase, profile system and frame geometry; the software settings and tools must match the product.
The animation explains the principle of the application area. It is not a simulation of motion or of the equipment of model PL-E.
What defines this version ↓Key features of PL-E
- Design: 2 CNC axes.
- Profile height: 40–180 mm
- Maximum profile height: mm / 180
- Minimum profile height: mm / 40
- Materials in the manufacturer’s programme: PVC. Suitability is checked for the specific profile.
How to compare the version
The process diagram below shows the connection of phases in production. It does not mean that a single model performs all shown operations by itself.
Selected data from the technical table. Multiple values mean different configurations; details are listed below.
Version details
Technical data.
| General data | ||
|---|---|---|
| Maximum profile height | mm | 180 |
| Minimum profile height | mm | 40 |
| Maximum cutter diameter | mm | 250 |
| Rotational speed | rpm | 3000 |
| Mains frequency | Hz | 50-60 |
| Installed electrical power | kW | 2 |
| Electrical supply | V | 400 ±5% |
| Air consumption per working cycle | Nl | 14 |
| Working pneumatic pressure | bar | 6-7 |
| Machine height | mm | ± 1800 |
| Machine width | mm | ± 1800 |
| Machine length | mm | ± 1400 |
| Machine mass | kg | ± 800 |
The values apply to the specified model or family. More values in a row mean different versions or equipment. Standard and optional equipment as well as final dimensions are confirmed for the quotation configuration.
Technical source for this model external link
The manufacturer's original documentation opens in a new tab.
MECAL Machinery / PL-E external page ↗Close-up view
Technology in detail.
From request to equipment
Let's talk about the PL-E model.
Together we will check the suitability and prepare the configuration for your work.